2022 / 08 / 28

2022 Taipei International Automation Industry Exhibition was successfully exhibited!

First of all, we would like to thank SYNTEC TECHNOLOGY, LEANTEC TECHNOLOGY and HONGLUN AUTOMATION for the mechanical arm provided by HINAKA, which have been favored and echoed by the HINAKA self-developed diaphragm chucks!

The self-developed diaphragm chucks by HINAKA breaks through the technical limitation, and the repeatability can reach 0.02mm, which is suitable for all kinds of precise clamping and positioning occasions. The three-inch diaphragm-type chuck can hold objects weighing 20 kg (including the self-weight of the end fixture). With the self-developed rotary joint, it can overcome the limit of the rotation angle on the sixth axis of the mechanical arm, and adopts the design of the inner circuit to ensure that a stable electrical signal and air source can be maintained at any time and in any action.

The three-inch diaphragm chuck has a four-phase electron signal and a four-phase air source circuit, which can transmit the signal and air source to the end fixture control. It is suitable for all kinds of collaboration and Industry 4.0 equipment.

Thanks to the industry manufacturers who came to HINAKA to visit and exchange information with each other. Thanks to TSMC, Hon Hai Technology, HIWIN Technology, NCSIST and Festo for their technical exchanges and their affirmation of HINAKA.

HINAKA FLUID POWER, which began to transform at the end of 2021, has rebuilt its brand image and opened up the international market. With more than 30 years of fluid experience, we hope to contribute to fluid application and industry!

Show Location : Nangang Exhibition Center - Hall 1-1F (TaiNEX 1) Show Dates : August 24 (Wed.) - August 27 (Sat.), 2022 Opening Hours : 9:30 - 17:00 (Closing one hour early on the last day) Booth No. : J930